Introduction to Single Pillar Anti aircraft Gun Billboard
The size of the cement foundation for a single column billboard depends on the size of the billboard and the local wind pressure. The foundation weight of a single column advertisement with a height of 18mx6m and 18m on both sides according to the national standard should be around 48 cubic meters. Currently, the general construction of a single column advertisement foundation is around 30-40 cubic meters.
1、 Production process of single column anti-aircraft gun billboard
1. Location selection
The placement of advertisements should be approved by the unit and set up in accordance with regulations.
2. Manual excavation of pits
To ensure the secure installation of single column billboards, it is necessary to lay a solid foundation. To ensure the stability and safety of the billboard, a large pit should be excavated at the advertising location that can accommodate the foundation of the column support.
3. Combination of screen cards
The designed image should be combined with the sign surface above the column bracket to ensure the integrity of the advertisement.
4. Overall installation
In addition to the support foundation being fixed below the surface, a portion of the column support must also be buried below the surface to ensure the overall stability of the support. The upper part of the bracket is tightly fixed with a ring buckle and the card face painting.
Previous：The steps and principles of making a three sided flip billbo
Next：no
1、 Production process of single column anti-aircraft gun billboard
1. Location selection
The placement of advertisements should be approved by the unit and set up in accordance with regulations.
2. Manual excavation of pits
To ensure the secure installation of single column billboards, it is necessary to lay a solid foundation. To ensure the stability and safety of the billboard, a large pit should be excavated at the advertising location that can accommodate the foundation of the column support.
3. Combination of screen cards
The designed image should be combined with the sign surface above the column bracket to ensure the integrity of the advertisement.
4. Overall installation
In addition to the support foundation being fixed below the surface, a portion of the column support must also be buried below the surface to ensure the overall stability of the support. The upper part of the bracket is tightly fixed with a ring buckle and the card face painting.
Previous：The steps and principles of making a three sided flip billbo
Next：no
Our Target:
Try our best to be an outstanding outdoor advertising product manufacturer.
Our Mission:
Benefit more customers,and develop ourselves.